Light-lift for chandeliers in residential and public premises. Let's service the chandelier with comfort!
Lifting devices for chandeliers are increasingly used in houses, apartments, hotel halls and theater halls - wherever the chandelier is located at a great height and it is quite difficult to maintain it and keep it clean.The range of hoists for chandeliers presented on the market is not very wide: the hoists differ in load capacity, construction, cable length, and possible installation location.In order not to make a mistake with the choice of the necessary model, it is necessary to answer a number of questions.
Weight of the chandelier
This is the main parameter that you need to know for sure when choosing a lifting mechanism. If the chandelier is new, it is easy to do: its weight must be indicated in the technical documentation for the chandelier. If there is a need for a chandelier lift that has been in operation for some time, and there is no passport for it, do not be upset: companies engaged in the installation and maintenance of chandelier lifts will carry out weighing on their equipment. This applies to chandeliers "with a history" installed in theaters, museums, and churches. Although sometimes archival data contain quite accurate information. The weight of the chandelier should not absolutely coincide with the lifting capacity of the elevator - it is better to choose a model with a margin of weight so that the engine of the elevator does not work at the limit, but lasts much longer than the term established by the warranty.
Room height
It is much more convenient to service the chandelier while standing on the floor than from a ladder or scaffolding. However, it is worth remembering that the design of the hoist provides a limitation on the length of the cable and it is worth paying attention to this parameter so that its length during installation turns out to be sufficient. Knowing exactly the height from the floor to the ceiling and the height of the chandelier together with the chain, it is easy to calculate the length of the cable for the required model of the light lift.
Lift installation
Having studied the features of the room, it is easy to determine the type of ceiling: traditional horizontal, domed, inclined. It is very important how the ceiling is designed and what the floor is made of: wood or concrete. The ceiling can be stretch, plasterboard or made of decorative materials (glass, wood, plaster panels). Perhaps there is an attic in the room, where it will be more convenient to install the lift or you decide to install it simply on the ceiling, and maybe there is a technical room on the upper floor, where there will be a place for the lift. During installation, you will not need to lay an additional cable: the cable laid for the chandelier will be enough.
A lift for a chandelier gives many advantages:
1. Ease of installation of the chandelier. Having lowered the lift cable with the contact group to the desired height, it is easy to connect tier after tier of the chandelier by gradually lifting the cable up.
2. Care and maintenance. Chandelier maintenance is a regular and mandatory procedure for all public spaces. Using the remote control, you can easily and quickly lower the chandelier to a convenient viewing height. There will no longer be a need to build a construction tower, hire lift specialists or resort to the help of a "scissor lift", as well as worry about the preservation of the chandelier itself, the floor or stairs.
3. Job security. When the chandelier is lowered according to the signal from the remote control, the contacts are automatically opened and the chandelier is de-energized, so you can not be afraid of electric shock when working with it. In addition, the disconnected chandelier cable remains static rather than winding/unwinding each time the hoist is in operation and thus does not get twisted or damaged.
4. Simplicity and convenience of management. The light lift is controlled using a remote control or from a wall-mounted control panel. All models of lifts can be connected to the Smart Home system.
The Paytex company offers a wide selection of models of light lifts for chandeliers. We offer models with a load capacity from 15 kg to 5000 kg with a cable length of up to 45 m, models for various mounting methods: ceiling and ceiling with offset from the axis of the chandelier attachment. We are manufacturers of light lifts and we design and manufacture models for cases of non-standard installation methods. All our models are tested with double weight - they are absolutely safe during operation. We guarantee uninterrupted operation of the lift during the entire warranty period and will help with its maintenance after. Contact our specialists by phone at +380 99 276 28 35, +380 63 276 28 35 or try to choose the required lift model in the catalog yourself - all the lifts presented there are in stock and the warehouse program is in effect.