Insecticidal lamps at work: management and maintenance
If you find a fly in a kefir package, in a cake or in packing with meat minced meat, then most likely throw this product and refuse to refuse this manufacturer. This is understandable, because insects transfer a huge number of microorganisms that can cause hazardous diseases. And even if the diseases can be avoided, then in any case, the presence of pests and microbes directly affects the decline in product quality. Manufacturers try to make their products not only high quality and tasty, but also safe to health, provide protection against all types of insects and from flying insects including.
For this, many production and trading networks are equipped with devices for trapping insects. In the shops of food, alcohol, pharmaceutical, chemical industry, on livestock farms, in the halls of a cafe, supermarkets, where pest protection should be as efficient and safe to install insecticidal lamps.
Insecticidal lamps attract insects, capture and neutralize them. They consist of a lamp, a metal lattice, which is supplied with an electric current and pallet. Neither the lamp itself nor the electric grille for a person does not pose a danger. The voltage on it, though the high, but the current of the current is only 13 mA and it is fenced for the security of the special grille. Killed insects fall into the pallet. Luminaires are located on the ceiling, evenly throughout the area of the room. Industrial insect destroyers operate on areas from 40 to 250 sq.m.
In 1995, scientific studies were conducted in Birmingham University, confirming that the most attractive for flying insects is the ultraviolet radiation of the spectrum and the wavelength range of 350-380 nanometers. LED lamp with radiation with a wavelength of 365 nanometers is optimal to attract all flying insects and safe for people and animals
Industrial insecticidal luminaires are mounted in a suspended position in the premises of shops, warehouses, trading rooms, farms, in greenhouses. They are operated continuously and need timely and regular cleaning. Lamps are usually equipped with a removable tray - it is very convenient. However, to serve each lamp in the large industrial premises still leaving a variety of time: you need to install a stepladder or a construction tower and move it from the lamp to the lamp. Costs for cleaning services are also large enough.
The light lift for lamps is a device that will significantly save time, strength and financial resources for the maintenance of industrial lamps. This device installed on the ceiling and connected to each lamp by signal from the remote control lowers the lamp to the desired height. When moving down, the luminaire contacts are blocked, and it is lowered de-energized, so it is completely safe to work further with the lamp. Conveniently standing on the floor, and not on a riding ladder, the employee will cope with its task faster and better. At the end of the work, the lamp can be easily raised to its working height, where its contacts will be closed, and it will continue to work. The upper and lower position for the lamp is programmed with a remote control, so that next time you do not need to spend extra time - the lift stops the lamp according to the specified height parameters. Driving the light-lift is very simple: anyone will cope with it. There is no need to de-energize all the lamps at the time of cleaning - when using the lifts, they will continue to work and protect the room from insects. The cost of installing lifts pays off very quickly, because no longer need to attract third-party cleaning services - it is possible to cope with their forces quickly and without additional costs. Paytex establishes light lifts for lamps since 2014 and we are ready to provide and install light lift if you need them.
The Paytex company has been installing motorized lift systems for lamps since 2014, and we are ready to provide and install light lifts if you need them. Get in touch!